Skip to content

← Back to overview · Tips & tricks

Cleaning the Trap Under the Washbasin: A Guide

Washbasin draining slowly? How to clean the trap step by step, without chemicals and without water damage. With tips on seals and prevention.

Cleaning the trap: step by step

The trap (siphon) is the curved piece of pipe under the washbasin. It always holds a little water that keeps odours from the sewer out. At the same time, hair, soap residue and toothpaste collect there. If the water drains slowly, the trap is usually the first place to check.

Preparation

  • Place a bucket or a shallow bowl under the trap
  • Lay out cloths and put on gloves
  • Clear out the vanity unit so you can reach it easily

Step 1: Loosen the trap

Many plastic traps have a cup or union nuts that can be loosened by hand. Turn slowly: the standing water will run into the bucket. Metal traps sometimes need pliers with a cloth as protection.

Step 2: Clean

Remove hair and deposits by hand or with a bottle brush. Then wash the parts with warm water and a little washing-up liquid. Also look into the pipe leading to the wall, as far as the brush will reach.

Step 3: Check the seals

There are rubber seals between the parts. They should be clean, smooth and correctly seated. If a seal is cracked or deformed, it is better to replace it, otherwise it will drip later.

Step 4: Reassemble and test

Screw everything back together, hand-tight but without force. Then run the water for a while and check with a dry cloth under the joints whether anything drips. Leave the bucket in place for a little longer.

What you should avoid

  • Chemical drain cleaners attack seals and pipes and can be dangerous on contact with the skin
  • Do not poke around in the pipe with wire or sharp tools
  • No force on old metal joints

Prevention

A hair strainer in the drain and regular rinsing with warm water help reduce build-up. If the water still drains poorly despite a clean trap, the blockage lies deeper in the pipe. Then we come with the right tools: AQUARO Haustechnik, +41 58 510 76 24.

Checklist

  • Place a bucket underneath, lay out cloths
  • Loosen the trap by hand
  • Clean it, check the seals
  • Reassemble, run the water, check for drips

When to call a professional

  • If the water drains poorly despite a clean trap
  • If several drains are affected
  • If old metal parts are stuck or leaking

Emergency 24/7: +41 58 510 76 24

Plumbing glossary: Siphon (trap)

This page in German: /blog/siphon-reinigen

Emergency 24/7+41 58 510 76 24Office+41 58 510 76 24Request a callbackReport damage