← Back to overview · Tips & tricks
Tips & tricks
Descaling a Shower Head: The Gentle Way
Shower head clogged with limescale? How to descale it gently with vinegar or citric acid, what to avoid and when a replacement makes sense.
Descaling a shower head: step by step
Depending on the region, tap water contains more or less lime. Over time, deposits build up in the fine nozzles of the shower head. The result: the spray becomes uneven, some nozzles spray sideways or stop working altogether. As a rule, you can fix this yourself.
First check: is it really the shower head?
If the tap at the washbasin also delivers only a little water, the cause is more likely the pipework or the pressure in the whole building. If only the shower is affected, take a look at the shower head and hose.
Step 1: Unscrew the shower head
Most shower heads can be unscrewed from the hose by hand. If it is stuck, put a cloth under the pliers as padding so the surface does not get scratched. Watch out for the small seal in the thread and put it aside.
Step 2: Soak it in descaler
Simple household products have proven effective:
- Vinegar diluted with water
- Citric acid dissolved in warm water
Place the shower head in a container so that the nozzles are covered and leave it to soak for a few hours. Boiling water is not necessary and can deform plastic parts. Follow the manufacturer's instructions, especially for chrome-plated or coated surfaces.
Step 3: Rub the nozzles clear
Many shower heads have soft rubber nozzles. Rub over them with your finger and the lime often comes off by itself. For hard nozzles, an old toothbrush helps. Better avoid sharp objects such as needles, as they can damage the openings.
Step 4: Rinse and refit
Rinse the shower head thoroughly with clean water, insert the seal and screw it back on by hand. Run the shower briefly so that loosened residue is flushed out.
Prevent it regularly
Descaling the shower head every now and then saves you stubborn crusts. Rinsing it briefly with cold water after showering and wiping it dry also helps.
If it does not improve
If the spray stays weak even though the shower head is clean, the hose may be kinked, the mixer tap furred up or a valve defective. We will gladly check this on site: AQUARO Haustechnik, +41 58 510 76 24.
Checklist
- Unscrew the shower head, put the seal aside
- Soak in diluted vinegar or citric acid
- Rub the rubber nozzles clear, rinse well
- Insert the seal, screw back on by hand
When to call a professional
- If the spray stays weak despite a clean shower head
- If the mixer tap drips or sticks
- If the shower head is stuck and will not come off
Emergency 24/7: +41 58 510 76 24
Plumbing glossary: Thermostatic mixer (Thermostatbatterie)
This page in German: /blog/duschkopf-entkalken
